Removable Counterweight Forklift / XH-400RC
Click Image to Enlarge
Taylor® XH-400RC
The XH-400RC Heavy Duty Removable Counterweight Lift Truck is purposely built for the Port Operations Industry and is unique in its ability to be lifted into the hull of a ship to handle steel and tackle other heavy material handling needs. With a Removable Counterweight, the XH-400RC Removable Counterweight Lift Truck is destine to become an invaluable piece of the Port Operations Industry. Taylor Big Red. Engineering the Ultimate Lift Truck.
- Capacity: 40000 lbs / 18144 kg
- Capacity (MT): 18
- Load Center (in): 48 in. / 1219 mm
- Wheelbase (in): 155.0 in. / 3937 mm
- Engine: QSB6.7-C173 T4F
- Transmission: TC-32 3-sp. APC
- Mast (ft/Type): 11 UV
- Carriage Att. (in/Type): C-100
- Forks (in): 4.5x8.5x96
- Brake Type: Hydraulic
- Volts: 24
- Tires: 12.00 X 20 - 24PR
Standard Features:
- 12,400 Pound Removable Counterweight
- 51,700 lb. Vehicle Transport Weight w/o Counterweight
- 11-ft. ULTRA-VU 2-Stage Mast (146-in lowered height)
- 100-in Pin-type "C" Carriage
- 4.5-in X 8.5-in X 96-in pin mounted Forks
- Cummins QSB 6.7L 200 Hp Tier-4 Final diesel engine
- Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
- Dana TC-32 3-Speed powershift Transmission
- Powertrain Protection System for engine and transmission
- AxleTech PRC-1756W planetary drive axle with wet disc brakes
- Taylor 400 welded steel steer axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
- 12.00 X 24 - 24PR bias pneumatic drive and steer tires (high load)
Chassis
- All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
- Integral counterweight
- Replaceable bolt-on steps and handrails
- Lockable Fuel Cap
- Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.
Cab
- Enclosed 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- 32,000 BTU heater and interior circulation fan
- Tinted glass with front and rear windshield wipers and front windshield washer
- Fully adjustable air ride swivel seat with 35° of rotation (15°/20° left-right)
- Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS) with 7-in touch screen color display
- One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- Color and number coded wiring.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical
- 24-volt electrical system with 95 amp alternator
- Dual heavy-duty batteries
- Battery disconnect/lock-out switch
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type anti-restart ignition switch
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
- (4) forward facing LED work lights (cab mounted)
- (2) rear facing LED work lights ("A" pillar mounted)
- (2) LED work lights (mast mounted)
VIP
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
No other images available at this time
No video available at this time
Taylor International® provides Heavy Duty Forklift sales, parts, and service for Central and South America. Taylor Forklifts and Material Handling Equipment are designed, engineered, and manufactured in the United States of America. Industries such as Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring commonly use Taylor® Products.
For information on any of the products we offer. please contact us