Taylor® T-1025 Details
Purpose Built Cargadores de ruedas

Carga de vuelco / recta:

32046 lbs / 14536 kg

Carga de vuelco / giro completo:

25354 lbs / 11500 kg

Altura máxima del pasador de bisagra:

158 in. / 4013 mm

Description:

Taylor Wheel Loaders are heavy industrial equipment used to move or load materials such as finished lumber, logs & poles (Millyard Applications), wood chips, steel & concrete pipe, demolition debris, raw minerals, recycled material, scrap material, etc. for processing and manufacturing.

Standard Features: T-1025 Recycler

  • 32,046-lb Straight Tipping Load
  • 25,354-lb Full Turn Tipping Load
  • 182-in Maximum Hinge Pin Height
  • Cummins QSB6.7 C-215 HP Tier-4 Final diesel engine
  • Automatic Idle System
  • Cummins air cleaner w/safety element & restriction indicator
  • 4-Speed ZF Powershift Transmission
  • Powertrain Protection System for engine and transmission
  • ZF Limited Slip Drive Axles with Wet Disc Brakes
  • 23.5 R25 L3 Pneumatic Front Tires
  • 23.5 R25 L3 Pneumatic Rear Tires

Chassis

  • Heavy Duty Steel Chassis
  • Steel Front and Rear Fenders
  • Rear Full Fenders swing out for easy access to the engine compartment.
  • High Lift Z-Bar Linkage features optimized geometry that positions the load closer to the tires and improves distribution of stress.
  • Steel Cylinder Debris Guards and Protective Cylinder Rod Sleeves
  • Front Wheel Well Debris Guards (Left and Right Side)
  • Auxillary Valve Lines pre-plumbed for accessory functions
  • Hinge Pins and Lift Arm Mounting Plates are optimized with special heat treat process to increase strength.
  • Electrically Actuated Hood ensures easy access to the engine and its easy-to-reach service points.
  • Full rubber floor mat for dampening of vibration and noise.
  • The 4-Bar steps are widely spaced to allow debris to fall through.
  • Auto-lube system (with protective guarding)
  • Articulation Locking Bar
  • Hydraulic Quick Coupler
  • Tow Hitch
  • Hinged Belly Guard
  • Rear Guard (Extends across Hood/Radiator/Rear Corners of Loader

Cab

  • Panoramic View Cab with curved front glass (includes dome light, wide angle mirrors, handrails and full rubber black floor mats).
  • Certified ROPS/FOPS cab
  • Protective Cab Guards for Front Windshield and L/R side Door/Windows
  • Adjustable Grammer Air Suspension Seat provides maximum comfort and reduces operator fatigue
  • Adjustable Steering Column
  • Single Joystick Control
  • Gauge group that includes engine/transmission levels and temperatures, hydraulic temperature, voltage, hour meter, brake oil pressure, Fuel/DEF level and Engine faults.
  • Front and Rear Windshield Wiper
  • Operator Restraint System (Orange, anti-cinch seat belt)
  • Secondary Steering (emergency)
  • Heat, Air Condition and Rear Windshield Defrost
  • Rear View Camera Display
  • Sun Visor
  • Fire Extinguisher
  • Ride Control

Electrical

  • 24-volt electrical system
  • Maintenance free Heavy-duty batteries
  • Two front halogen lights (with high/low beam)
  • Two front LED lights (mounted top of cab)
  • Two rear LED lights (mounted top of cab)
  • Electric horn
  • Amber strobe light
  • Reverse actuated warning alarm

Vehicle Information Package

  • Operator’s Guide
  • Maintenance and Service Documentation

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.