Taylor® T-1045
Ampliar foto
Taylor® T-1045
Taylor Wheel Loaders are heavy industrial equipment used to move or load materials such as finished lumber, logs & poles (Millyard Applications), wood chips, steel & concrete pipe, demolition debris, raw minerals, recycled material, scrap material, etc. for processing and manufacturing.
Impresión
- Carga de vuelco / recta: 53,295 lbs / 24,174 Kg
- Carga de vuelco / giro completo: 45,645 lbs / 20,704 Kg
- Altura máxima del pasador de bisagra: 180 in. / 4572 mm
- Distancia entre ejes: 146.0 in. / 3708 mm
- Motor: QSG12 C-352hp T4F
- Transmisión: ZF Powershift 4-sp.
- Tipos de archivos adjuntos: Std. horquillas, varias abrazaderas, cubo volcado
- Tipo de freno: Disc mojado
- Voltios: 24
- Neumático: 20.5-R25 L3 x 4
Standard Features: T-1045
- 53,295-lb Straight Tipping Load
- 45,645-lb Full Turn Tipping Load
- 15-ft 0-in Maximum Hinge Pin Height
- Cummins QSG12 C-352 HP Tier-4 Final Diesel Engine
- Automatic Idle System
- Cummins air cleaner w/safety element & restriction indicator
- 4-Speed ZF Powershift Transmission
- Powertrain Protection System for engine and transmission
- Reversible hydraulic fan paired with 6mm hexagon grill improves ventilation and increases cooling efficiency
- ZF Hydraulic Lock Differential Axles with Wet Disc Brakes
- 29.5 R25 L3 Pneumatic Front Tires
- 29.5 R25 L3 Pneumatic Rear Tires
- Wedge Blocks
Chassis
- Heavy-Duty Steel Chassis
- Z-Bar Linkage features optimized geometry that positions the load closer to the tires and improves distribution of stress.
- Auxiliary Valve Lines pre-plumbed for accessory functions
- Hinge Pins and Lift Arm Mounting Plates are optimized with special heat treat process to increase strength.
- Electrically Actuated Fiberglass Hood ensures easy access to the engine and its easy-to-reach service points.
- Both Rear Full Fenders swing out for easy access to the engine compartment.
- Full rubber floor mat for dampening of vibration and noise.
- 5-Bar stamped steps features 10° ergonomic incline and anti-slip tread
- Auto-lube System
- Articulation Locking Bar
- Tow Hitch
- Belly Guard
Cab
- Panoramic View Cab with curved front glass (includes dome light, wide angle mirrors, handrails and full rubber black floor mats).
- Certified ROPS/FOPS cab
- Adjustable Grammer Air Suspension Seat provides maximum comfort and reduces operator fatigue
- Adjustable Steering Column
- 3-lever fingertip control
- Gauge group that includes engine/transmission levels and temperatures, hydraulic temperature, voltage, hour meter, brake oil pressure, fuel/DEF levels and engine faults.
- Front and Rear Windshield Wiper
- Operator Restraint System (Orange, anti-cinch seat belt)
- Secondary Steering (emergency)
- Heat, Air Condition and Rear Windshield Defrost
- Rear View Camera Display
- Sun Visor
- Fire Extinguisher
- Ride Control
Electrical
- 24-volt electrical system
- Maintenance free Heavy-duty batteries
- Two front halogen lights (with high/low beam)
- Two front LED lights (mounted top of cab)
- Two rear LED lights (mounted top of cab)
- Electric horn
- Amber strobe light
- Reverse actuated warning alarm
Vehicle Information Package
- Operator’s Guide
- Maintenance and Service Documentation
Taylor International® proporciona Cargadores de ruedas ventas, repuestos y servicio para Centro y Sudamérica. Taylor Forklifts y Material Handling Equipment están diseñados, fabricados y fabricados en los Estados Unidos de América. Industrias como el acero, el aluminio, la madera, la madera, el concreto, el prefabricado, el breakbulk, el intermodal, los puertos, los ferrocarriles y los estibadores suelen utilizar productos Taylor®.
Para obtener información sobre cualquiera de los productos que ofrecemos. Por favor contáctenos