Montacargas de centro de carga de 36 pulg / X-550S
Taylor® X-550S
The X-550S is capable of handling long duty cycles with a lift capacity of 55,000lbs. Taylor 36-in Load Center Pneumatic Tire forklifts are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring. Own a Taylor forklift and you'll never turn back. That's because Taylor Big Red designs, engineers and manufactures the Ultimate Heavy Lift Trucks
Impresión
- Capacidad: 24,948kg / 55000 lbs
- Tonne: 25
- Centro de carga (mm): 914 mm / 36 in.
- Distancia entre ejes (mm): 3657 mm / 144.0 in.
- Motor: QSB6.7-C225 4F
- Transmisión: TE-17 3-sp. APC
- Mástil (mm/Tipo): 3,352 UV
- Carro Att. (Tipo): C-100
- Tenedores (mm): N/A
- Tipo de freno: Hidráulico
- Voltios: 24
- Neumático: 14.00 X 25-20PR
Standard Features: X550S
- 11-ft ULTRA-VU 2-Stage Mast (155-in lowered height)
- 100-in Pin-type Carriage
- 5-in X 10-in X 72-in pin mounted Forks (X-450S has 4.5-in X 8.5-in X 72-in)
- Cummins QSB 6.7L 225Hp Tier-4 Final diesel Engine
- Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension with TaylorMax Precleaner)
- Dana TE-17 3-Speed powershift Transmission
- Powertrain Protection System for engine and transmission
- Axletech PRLC-1794W planetary Drive Axle with Wet Disc Brakes
- Taylor HD-450 welded steel Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 14.00 X 25 - 20PR bias pneumatic drive and steer tires (high load)
Chassis
- All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
- Bolted counterweight
- Replaceable bolt-on steps and handrails
- Lockable Fuel Cap
- Hinged engine hood, side service doors and removable floor panels open to expose drive train for ease of maintenance.
Cab
- Enclosed 2-door steel all-welded DREAM Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
- 32,000 BTU heater and defrost
- Tinted glass with front and rear windshield wipers
- Fully adjustable air ride swivel seat
- Multifunction Joystick mounted on adjustable arm rest (integrated directional shift control)
- Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
- Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
- Taylor Integrated Control System (TICS) …see next page for additional info
- TaylorTrak Pro - Advanced Fleet Telematics hardware
- 7-in touch screen color display
- The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
- All wiring is color and number coded.
- Dual USB charging ports
- Hydrostatic, steer-on-demand power steering with tilt steering column
Electrical
- 24-volt electrical system with 95 amp alternator
- Dual heavy-duty batteries
- Battery disconnect/lock-out switch
- (4) forward facing LED work lights (cab mounted)
- (2) rear facing LED work lights (“A” pillar mounted)
- (2) LED work lights (mast mounted)
- Circuit breakers with heavy duty connectors (no automotive type fuses)
- Breaker reset switches
- Key-type anti-restart ignition switch
- Dual electric trumpet horns (116 dBA)
- Keyswitch-actuated amber strobe light
- Forward and reverse-actuated warning alarms
Vehicle Information Package
- Operators Guide
- Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
- Safety Check Manual and Video
No hay video disponible en este momento
Taylor International® proporciona Montacargas de servicio pesado ventas, repuestos y servicio para Centro y Sudamérica. Taylor Forklifts y Material Handling Equipment están diseñados, fabricados y fabricados en los Estados Unidos de América. Industrias como el acero, el aluminio, la madera, la madera, el concreto, el prefabricado, el breakbulk, el intermodal, los puertos, los ferrocarriles y los estibadores suelen utilizar productos Taylor®.
Para obtener información sobre cualquiera de los productos que ofrecemos. Por favor contáctenos