Montacargas Serie GT de 24" de centro de carga / GT-60
Ampliar foto
Taylor® GT-60
The GT60 is capable of handling long duty cycles and has a rated capacity of 6,000-lbs. Taylor 24-in Load Center Pneumatic Tire lift trucks are engineered to meet the needs of the following industries: Steel, Aluminum, Wood, Lumber, Concrete, Precast, Breakbulk, Intermodal, Ports, Rail and Stevedoring.
Impresión
- Capacidad: 2,722kg / 6000 lbs
- Tonne: 3
- Centro de carga (mm): 610 mm / 24 in.
- Distancia entre ejes (mm): 1699 mm / 66.9 in.
- Motor: PSI 4X 2.4L LPG or Isuzu 4LE2X 2.2L Diesel (T4F)
- Transmisión: Automatic Powershift
- Mástil (mm/Tipo): Mástil de 2 etapas
- Carro Att. (Tipo): 41-in Hook Type Class III Carriage (with Load Backrest)
- Tenedores (mm): 25mm x 127mm x 1,067mm
- Tipo de freno: Hidráulico
- Voltios: 12
- Neumático: Single Front: 28x9x15-14PR; Rear: 6.50X10-12PR
Standard Features: GT-60
- 130-in Max Fork Height 2-Stage Mast (87.9-in lowered height)
- 41-in Hook Type Class III Carriage (with Load Backrest)
- Hydraulic Cushioning Valve facilitates silent staging and reduces shock and vibration
- Carriage features (6) load and side thrust rollers (shimmable, sealed and canted)
- 1.75-in X 5-in X 42-in pin mounted Forks GT-60
- PSI 2.4L Tier-4 Final 4-Cylinder Engine (Diesel is available)
- Donaldson dry-type air cleaner w/safety element & restriction indicator
- Single Speed Powershift Transmission with Inching
- Powertrain Protection System for engine and transmission
- HD planetary Drive Axle with Wet Disc Brakes
- Fully Boxed Welded Steer Axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
- 28 X 9 X 15 Pneumatic Single Drive tires
- 6.00 X 10 Pneumatic Steer tires
Cab
- Isolation mounted open operator base with overhead guard (includes dual brake pedal, dome light, wide angle mirrors, handrails and full rubber black floor mats).
- Adjustable Black Vinyl Covered Full Suspension Seat (Seat has 6” fore and aft travel, adjustable back rest, 2.4” vertical travel, and lumbar support. Also has Operator weight range adjustability.)
- Column mounted directional control with no linkage - FWD/REV selected by moving lever up and down
- Hood mounted hydraulic control levers
- Operator Restraint System (Orange, anti-cinch seat belt)
- Dual operator presence systems will not allow transmission to engage and will not allow hydraulics to engage unless operator is in the seat.
- Interactive LCD Dash Display with audible warnings for low fuel, transaxle oil temperature, parking brake and seat belt. Visual displays for transmission temperature, engine oil pressure, alternator, fuel system, seat belt reminders, turn signals, gear selected, maintenance timer, fuel levers, and travel speeds. (Includes Fault Code Storage)
- Two pedal hydraulic inch brake provides excellent control and comfort
- Infinitely adjustable steering column that pivots 30° above knee
- Hood mounted ratchet style park brake disengages transmission when applied
Electrical
- 12-volt electrical system
- Heavy-duty battery
- Utilizes all environmentally sealed wire connectors
- Key-type electronics switch with key start
- Electric horn
- Keyswitch-actuated amber strobe light
- Reverse actuated warning alarm
Vehicle Information Package
- Operator’s Guide
- Maintenance and Service Documentation
- Safety Check Manual and Video
No hay otras imágenes disponibles en este momento.
Taylor International® proporciona Montacargas Industriales ventas, repuestos y servicio para Centro y Sudamérica. Taylor Forklifts y Material Handling Equipment están diseñados, fabricados y fabricados en los Estados Unidos de América. Industrias como el acero, el aluminio, la madera, la madera, el concreto, el prefabricado, el breakbulk, el intermodal, los puertos, los ferrocarriles y los estibadores suelen utilizar productos Taylor®.
Para obtener información sobre cualquiera de los productos que ofrecemos. Por favor contáctenos