Standard Features:

• 24-ft. Rigid Mast
• Log clamp with kickers
• 10-in X 108-in pin mounted Forks
• Volvo 12.8L TAD1374VE - 503HP Diesel Engine
• Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
• Dana 6000 4-Speed powershift transmission
• Powertrain Protection System for engine and transmission
• Kessler D-111W HD planetary drive axle with wet disc brakes
• Taylor 600 welded steel steer axle (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
• Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
• 37.25 X 39 - 44PR bias pneumatic drive tires
• 21.00 X 25 - 32PR bias pneumatic steer tires

CHASSIS:

• All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
• Bolt-on counterweight
• Durable access platform with handrails
• Lockable Fuel Cap
• Large engine bay doors and side service doors open to expose drive train for ease of maintenance

CAB:

• Enclosed, steel all-welded cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails and is isolation mounted for noise and vibration reduction)
• Air conditioned, heat/defrost and interior circulation fan
• Tinted glass with front and rear windshield wipers and front windshield washer
• Fully adjustable air ride seat mounted on a rotating platform with 45° of total rotation
• Arm rest mounted mini-wheel steer control
• Multifunction Joystick mounted on adjustable arm rest (11-button command with integrated directional shift control)
• Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
• Operator Presence System with timed idle (5 minute default, password adjustable from 1-120 minutes by end user)
• Taylor Integrated Control System (TICS) with 7-inch Display
• The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
• All wiring is color and number coded.

ELECTRICAL:

• 24-volt electrical system with 75 amp alternator
• Dual 220 amp-hour heavy-duty batteries
• Battery disconnect/lock-out switch
• (6) forward facing LED work lights (cab mounted)
• (4) rear facing LED work lights
• (1) LED work lights (mast mounted)
• (1) LED step light
• Circuit breakers with heavy duty connectors (no automotive type fuses)
• Breaker reset switches
• Key-type anti-restart ignition switch
• Dual electric trumpet horns (116 dBA)
• Keyswitch-actuated amber strobe light
• Forward and reverse-actuated warning alarms

VIP:

• Operators Guide
• Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
• Safety Check Manual and Video

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.