Standard Features

• 32.5' ULTRA-VIEW Telescopic Mast for stacking 4-High (9' 6" Empty) & 4-High (8' 6" Empty)
• Side Pick 20-40 ISO Container Handling Attachment, Integrated into the Side Shift Carriage(24" each direction). Features guide arms, mechanical pile slope & twistlock safety interlock system.
• Accumulator in Lift Circuit
• Cummins QSB6.7L 173-HP Tier 4-Final Diesel (Turbocharged)
• Donaldson dry-type air cleaner w/safety element & restriction indicator (vertical air intake extension)
• Dana TC-32 3-speed powershift transmission
• Powertrain protection system for engine and transmission
• Kessler D-81W planetary drive axle with wet disc brakes
• Taylor 310 welded steel steer axle with stud protectors (single hydraulic cylinder design with heavy-duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
• 12.00 X 20 - 20PR bias pneumatic drive and steer tires

Chassis

• All-welded steel frame with 4 Lifting Eyes (lifting eyes not designed for level pick)
• Bolted counterweight
• Replaceable bolt-on steps and handrails
• Lockable Fuel Cap
• Sliding engine hood (on rollers), side service doors and removable floor panels open to expose drive train for ease of maintenance.

Cab

• Isolation mounted open operator base with overhead guard and skyview window (includes single brake pedal, dome light, wide angle mirrors, handrails and black floor mats).
• Adjustable Black Vinyl Covered Mechanical Suspension Seat w/Arm Rests (Seat has left 15/right 15 degree rotation)
• Multifunction Joystick mounted on adjustable arm rest (11-button command)
• Column mounted Roll Shift Directional Control
• Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
• Operator Presence System with timed idle and neutral shutdown (5 minute default, password adjustable from 1-120 minutes by end user)
• Taylor Integrated Control System (TICS) with 7-in touch screen color display
• One-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
• Color and number coded wiring.
• Dual USB charging ports
• Hydrostatic, steer-on-demand power steering with tilt steering column

Electrical

• 24-volt electrical system with 95 amp alternator
• Dual heavy-duty batteries
• Battery disconnect/lock-out switch
• 2 Sets of Amber/Green/Red Twistlock operation signal lights (mounted in cab and on container attachment)
• (2) LED work lights (twistlock mounted)
• Circuit breakers with heavy duty connectors (no automotive type fuses)
• Breaker reset switches
• Key-type anti-restart ignition switch
• Dual Electric Trumpet Horn (116 dBA)
• Keyswitch-actuated amber strobe light
• Forward and reverse-actuated warning alarms

VIP

• Operators Guide
• Maintenance and Service documentation including key circuit drawings (Serial Number Specific Parts Book is available upon request)
• Safety Check Manual and Video

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.