Taylor® X-720RR Detalles
Propósito construido Montacargas de servicio pesado

Capacidad:

72000 lbs / 32659 kg

Centro de carga (mm):

48 in. / 1219 mm

Distancia entre ejes (mm):

185.0 in. / 4699 mm

Description:

The X-620RR and X-720RR are specifically designed for use on RORO (Roll On/Roll Off) ships. RORO ships have built-in ramps which allow the cargo to be "rolled on" and "rolled off" the ship when in the port. With an overall height of only 112-inches (top of cab) and an overall width of 135-inches, the X-620RR and X-720RR are capable of operating within confined spaces. The offset cab features dual operating controls and a seat capable of rotating 180° degrees to allow the operator to face the direction of travel.

Standard Features

  • 10-ft. Direct Lift 2-Stage Mast (112-in lowered height)
  • 120-in Pin-type "C" Carriage
  • 5-in X 12-in X 96-in pin mounted Forks
  • Cummins QSL9 250Hp Tier-4 Final diesel Engine
  • Donaldson dry-type air cleaner w/safety element & restriction indicator(vertical air intake extension with TaylorMax Precleaner)
  • Dana TC-36 4-Speed powershift Transmission
  • Powertrain Protection System for engine and transmission
  • Kessler D-102 planetary Drive Axle with Wet Disc Brakes
  • Taylor 650/700 welded steel Steer Axle (single hydraulic cylinder design with heavy duty links from the cylinder ram directly to tapered roller bearing mounted spindles)
  • Solid plate steer angle limitation (more contact area than bolt heads which require adjustment)
  • 16.00 X 25 - 36PR bias pneumatic drive and steer tires

Chassis

  • All-welded steel frame with 4 lifting eyes (lifting eyes not designed for level pick)
  • Bolted on piece counterweight
  • Replaceable bolt-on steps and handrails
  • Lockable Fuel Cap
  • Gull Wing engine hood, side service doors and tilting cab open to expose drive train for ease of maintenance.

Cab

  • Enclosed Offset 2-door steel all-welded Cab (includes dome light, wide angle mirrors, door hold back latches with trip handles, handrails, black floor mats and is isolation mounted for noise and vibration reduction)
  • 32,000 BTU heater and interior circulation fan
  • Tinted glass with front and rear windshield wipers and front windshield washer
  • Fully adjustable air ride swivel seat with 180° rotating operator platform
  • Multifunction Joystick mounted on right adjustable arm rest (11-button command with integrated directional shift control). Mini-Wheel steering mounted on left arm rest
  • Operator Restraint System (Orange, anti-cinch seat belt with starting sequence neutral lock)
  • Operator Presence System with timed idle and neutral shutdown(5 minute default, password adjustable from 1-120 minutes by end user)
  • Taylor Integrated Control System (TICS) with 7-in touch screen color display
  • The one-piece flip-down instrument panel is pre-wired to accommodate heavy-duty accessories.
  • All wiring is color an
    • d number coded.
  • Dual USB charging ports

Electrical

  • 24-volt electrical system with 95 amp alternator
  • Dual heavy-duty batteries
  • Battery disconnect/lock-out switch
  • (4) forward facing LED work lights (fender mounted)
  • (2) rear facing LED work lights (cab mounted)
  • (2) LED work lights (mast mounted)
  • Circuit breakers with heavy duty connectors (no automotive type fuses)
  • Breaker reset switches
  • Key-type anti-restart ignition switch
  • Dual electric trumpet horns (116 dBA)
  • Keyswitch-actuated amber strobe light
  • Forward and reverse-actuated warning alarms

DISCLAIMER:

This vehicle is certified to meet the applicable design and performance criteria required for Powered Industrial Trucks in OSHA Safety and Health Standards, Title 29 CFR. Part 1910.178, and the applicable design and performance requirements in ANSI B56.1 that were in effect at the time of manufacture. These standards also apply to the user and should be adhered to while operating this vehicle. All specifications are subject to change without notice. Some operating data may be affected by the condition of the vehicle, how it is operated and the nature and condition of the operating area. If these specifications are critical, contact the factory.